WDTE

Specifications:

Sensors:

Internal Temperature External A/D

Alarm:

Internal PIEZO

Address Space:

4 I/O Addresses (200-3FCh)

Initial Timeout:

1,2 or 5 minutes

Cable:

6" Reset Jumper

Timeout Range:

10ms to 10 minutes (selectable)

Size:

1/2 Card (8-Bit ISA)

Power:

100ma @ 5VDC

Relay:

1 Form C (0.5 Amp)

Connectors:

1-DB37M (external contact and A/D) 2-2 pin Headers (Internal RESET contact)

Software:

C, Turbo Pascal, Basic, DLL

 

$129.00

_____________________________________________

The WDTB incorporates an onboard microprocessor to establish a time base. Because the processor starts independently on power-up, the WDTE can detect problems with the PC boot-up sequence. An internal temperature sensor measures PC temperature. A second sensor input is available to measure temperatures external to the PC.