T-MAX® MANAGER/PRO

 Specifications:
Size: 5"H x 10"W x 2" D
Power: 9-12V (DC or AC), 800mA
Displays: 64 dual color LED displays showing bed status.
1, 16x2 VFD display showing bed time and status.
I/O: Computer: RS-232 protocol, DB9F w/6' Cable
ADNET: RJ-22 Connection
Power: 2.1mm Connector
Software: ADNET Utility Program
32KRAM
100KBytes Hard disk Drive Space
MS-DOS ver 3.1 or Higher; Windows® 95, 98 or NT


Click Picture to Enlarge

$599.00

_____________________________________________

Accessories Supplied: 1 10' DB9F-DB9M Serial port cable, 1 DB9F-DB25M serial port adapter, 1 T-Max® Manager/Pro Users Guide, 1 T-Max® Utility Diskette and 1 Power Supply.

Features: The T-Max® Manager/Pro is the front desk control unit for the T-Max® Series. It can be connected to up to 64 T-Max® 3As to control up to 64 tanning beds in a single salon. The T-Max® Manager/Pro has 64 dual-colored lights showing bed status. If the light for a certain bed is green, the bed is ready for a new session. If the light is red, the bed needs to be cleaned. If the light is flashing red, there is less than two minutes left in the session. If the light is flashing green, the T-Max® 3As is in the cool-down mode. If the light is off, that bed is not available. A 16x2 easy to read Vacuum Fluorescent Display (VFD) shows the exact status of a given bed. A 16 key keypad allows for manual session control. The T-Max® Manager/Pro can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-Max® Manager/Pro manually.

Up to eight T-Max® Manager/Pro's can be connected to a single salon. A PC can be connected to each T-Max® Manager/Pro in the salon. With two or more T-Max® Manager/Pro's, up to 128 beds can be controlled in a single salon.