T-MAX® MANAGER/PLUS Specifications: Size: 5"H x 10"W x 2" D Power: 9-12V (DC or AC), 800mA Displays: 64 dual color LED displays showing bed status. 1, 16x2 LCD display showing bed time and status. I/O: Computer: RS-232 protocol, DB9F w/6' Cable ADNET: RJ-22 Connection Power: 2.1mm Connector Software: ADNET Utility Program 32KRAM 100KBytes Hard disk Drive Space MS-DOS ver 3.1 or Higher; Windows® 95   $549.00 _____________________________________________ Accessories Supplied: 1 10' DB9F-DB9M Serial port cable, 1 DB9F-DB25M serial port adapter, 1 T-Max® Manager/Plus Users Guide, 1 T-Max® Utility Diskette, 1 Terminator, and 1 Power Supply. Features: The T-Max® Manager/Plus is the front desk control unit for the T-Max® Series. It can be connected to up to 64 T-Max® 3As to control up to 64 tanning beds in a single salon. The T-Max® Manager/Plus has 64 dual-colored lights showing bed status. If the light for a certain bed is green, the bed is ready for a new session. If the light is red, the bed needs to be cleaned. If the light is flashing red, there is less than two minutes left in the session. If the light is flashing green, the T-Max® 3As is in the cool-down mode. If the light is off, that bed is not available. A 16x2 back-lit LCD display shows the exact status of a given bed. A 16 key keypad allows for manual session control. The T-Max® Manager/Plus can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-Max® Manager/Plus manually. Up to eight T-Max® Manager/Plus's can be connected to a single salon. A PC can be connected to each T-Max® Manager/Plus in the salon. With two or more T-Max® Manager/Plus's, up to 128 beds can be controlled in a single salon.