SERIAL RS232 BOBCAT™ and
SERIAL RS485 BOBCAT™ Specifications

The Serial Bobcat™ provides an interface from the ADICON system to serial-controlled devices. The data transfer is output only from the Bobcat; it will not receive data.

Size:	2.5"L x 1.35"W x 0.6"H 6' DB-9 Male Cable
Power:	9-12 Volts AC or DC, 30 mA.
I/O:	ADNET: 2 Screw Terminals Power: 2 Screw Terminals* *(up to 14 AWG) 9 pin DB-9 serial connector (RS-232) 2-wire cable (RS-485)
ASCII Message Capacity:	128 messages, 32 bytes per message
Part #:	BOBCAT/RS232 BOBCAT/RS485